Saturday, September 5, 2009


How To Reset Domin Administrator Password in Windows Server 2003 And Windows Server 2008

Note: You need to have the local administrator's password in order to perform the following trick, and if you don't have it, then the only method of resetting (the local admin password) is by using third party software such as Hirens Boot Disk, etc., One such software that i would like to recommend is Spotmau PowerSuite 2009.
This procedure ALSO WORKS for Windows Server 2008 Domain Controllers. Also remember that I wrote this article in relation to Windows Server 2003, but you can now perform the same actions on Windows Server 2008.
Warning: This procedure is NOT designed for Windows XP since Windows XP is NOT a domain controller. 

  1. Local access to the Domain Controller (DC).
  2. The Local Administrator password.
  3. Two tools provided by Microsoft in their Resource Kit: SRVANY and INSTSRV. Download them from HERE (24kb).
Step 1 - Restart Windows 2003 in Directory Service Restore Mode.
Note: At startup, press F8 and choose Directory Service Restore Mode. It disables Active Directory. When the login screen appears, log on as Local Administrator. You now have full access to the computer resources, but you cannot make any changes to Active Directory.
Step 2  - Install SRVANY.
You are now going to install SRVANY. This utility can virtually run any programs as a service. The interesting point is that the program will have SYSTEM privileges (LSA) (as it inherits the SRVANY security descriptor), i.e. it will have full access on the system. That is more than enough to reset a Domain Admin password. You will configure SRVANY to start the command prompt (which will run the 'net user' command).

Copy SRVANY and INSTSRV to a temporary folder, mine is called D:\temp. Copy cmd.exe to this folder too (cmd.exe is the command prompt, usually located at %WINDIR%\System32).

Start a command prompt, point to d:\temp (or whatever you call it), and type:
instsrv PassRecovery "d:\temp\srvany.exe"
(change the path to suit your own).
Configuring SRVANY
It is now time to configure SRVANY.
Start Regedit, and navigate to 
Create a new subkey called Parameters and add two new values:
name: Application
type: REG_SZ (string)
value: d:\temp\cmd.exe

name: AppParameters
type: REG_SZ (string)
value: /k net user administrator 123456 /domain

Replace 123456 with the password you want. Keep in my mind that the default domain policy require complex passwords (including digits, respecting a minimal length etc) so unless you've changed the default domain policy use a complex password such as P@ssw0rd Now open the Services applet (Control Panel\Administrative Tools\Services) and open the PassRecovery property tab. Check the starting mode is set to Automatic.
Go to the Log On tab and enable the option Allow service to interact with the desktop. Restart Windows normally, SRVANY will run the NET USER command and reset the domain admin password.

Step 3
Log on with the Administrator's account and the password you've set in step #2. Use this command prompt to uninstall SRVANY (do not forget to do it!) by typing: 

net stop PassRecovery
sc delete PassRecovery 

Now delete d:\temp and change the admin password if you fancy.
Job Done!


About bench3 -

Haja Peer Mohamed H, Software Engineer by profession, Author, Founder and CEO of "bench3" you can connect with me on Twitter , Facebook and also onGoogle+

Subscribe to this Blog via Email :